homeFuel & IgnitionBattery Care at HomeBattery Care for DealersContact Us
Battery care - DEALERS

Visit our North American Site

Battery Care - Dealer

BatteryMate 150-9
BatteryMate 60-3
OptiMate PRO 4-S
Optimate PRO S
OptiMate PRO 2
OptiMate PRO 8-S
TestMate Mini
TestMate Sport
TestMate Auto
AccuMate Pro 12V/24V

Where to buy


Products

Fuel & Ignition
Battery Care at Home
Battery Care for Dealers


- ACCESSORIES -

To find cable or bracket accessories applicable to your product, click on the product image (for product detail), scroll down and then click on the ACCESSORIES link at the bottom.

 

 

BatteryMate 60-3

Accessories

Click here for the video

CLICK BELOW FOR INTERACTIVE DEMOS:
Function of knobs, buttons & lights (LEDs) on the control panel
Testing & Charging a Filler Cap Battery
Testing & Charging AGM or MF Batteries

Unique 2-in-1 battery management tool, a “no lies” battery load tester & an advanced diagnostic charger for all 12V motorcycle& scooter batteries of 2 to 9Ah rated capacity.

The charging circuit automatically recognises sulphated batteries & acts to recover them, & also incorporates a unique self-adaptive programme for the vital correct first “commissioning” charge for new sealed MF /AGM motorcycle batteries.

A must-have tool for workshops servicing scooters, motorcycles, ATVs, snowmobiles & ride on mowers.

  • Select 1 of 4 test current choices from 10A to 60A to test all scooter & motorcycle batteries delivering up to 130 CCA (SAE).
  • Press & release the test button to apply the load for 3 seconds. The voltage drop & rate of drop on the LED scale indicates basic state of health & required charge time. • Indicates if battery is deep discharged / sulphated (i.e. extremely flat) & automatically initiates a special high voltage recovery action, then recharges the battery normally.
  • Four constant current charge Amp settings from 0,8A to 3,2A, and a 4 stage charging programme.
  • The MF charging programme for fully sealed, MF /AGM or GEL absorbed acid batteries adapts its terminating charge voltage threshold value according to the individual battery characteristics, important for the optimal & vital first “commissioning” charge for new sealed MF /AGM motorcycle batteries before putting these into service.
  • Powerful constant current recharges a flat battery in 4 hours.
  • New battery commissioning charge done in 30 minutes.
  • Temperature-adjusted parameters for both testing & charging to ensure accurate results & optimal battery charging whatever the temperature of the surroundings.
  • BatteryMate is recommended by Derbi Internacional, Honda, Kawasaki, Suzuki, Triumph, Yamaha & others.
  • Input voltage selection allows use on 100V, 115V or 230V supply.
  • An optional (recommended) polyester-coated steel wall bracket saves bench space & places the charger away from corrosive acid fumes that may be present.
  • A full user manual available in many languages, & an instructional explanatory wall poster (in English, French, German, or Italian) are delivered with each BatteryMate.

2 year limited warranty.