To find cable or bracket accessories applicable to your product, click on the product image (for product detail), scroll down and then click on the ACCESSORIES link at the bottom.
Powerful Dual Programme multi-stage charger with 7A Constant Current for fast and thorough charging of Odyssey® & Optima® batteries as well as other lead-acid batteries.
Program 1 : for Odyssey® & Optima® batteries of minimum 12Ah capacity. These batteries are used where extreme conditions prevail.
Odyssey are commonly fitted as after-market upgrades to custom cruisers and other heavy V-twin motorcycles whose engines require higher than average cold cranking Amps.
Optima are commonly used wherever extreme or rugged conditions are typical, such as in extreme temperatures & in agriculture.
Programme 1 is also suitable for deep cycle / stand-by batteries of minimum 20Ah capacity requiring the higher charge voltage of 14,7V.
Program 2 : for all other 12V lead-acid engine-start batteries of minimum 18Ah capacity requiring a standard charge voltage of 14,4V as used on heavy motorcycles such as H-D, BMW, Guzzi, Gold Wing etc, and for automobile batteries.
“IUoU” 4-stage charging (including initialisation) with reversion from float charge maintenance mode to full current if for any reason the battery comes under load or loses power during storage maintenance.
No risk of overcharging - the AccuMate PRO's special temperature-regulated monitoring circuits regulate the current & voltage according to ambient temperature. The fully battery-interactive AccuMate charging programme ensures that the battery gets what it needs, no more, no less.
Integral keyhole slots in the back panel allow direct & easy wall mounting.
Handy integrated handle & cord winder for portable use. This can also be re-mounted below the charger for easier use when wall-mounted.
Detachable & easily replaceable charge clamps. Optional charge cable extensions allow up to 5m from charger to battery for on-vehicle charging.
Integral electronic protections against short circuits at the clamps & wrong polarity connections. Spark suppression system. No fuses to burn.
The output circuit switches off automatically if the charger becomes disconnected from the battery for any reason.
Competitively priced technology for all modern batteries.
CE certification. Meets all CE directives & EN norms. Available in many countries internationally.