Solid State Electronic Design

CarbMate displays the difference in vacuum intake settings of two linked carburetors to an adjustable resolution of 0,5cmHg to 2cmHg on a single transverse "East-West" 9 LED display.
The compact design and solid state electronics make the CarbMate very durable & resistant against nasty shocks & knocks.

Visual estimation errors, common to the traditional approach which is to visually compare the individual values on separate columns of mercury or dial gauges, are eliminated, as two pressures are compared and one value is displayed.

A ZERO adjustment knob provides easy & quick pre-calibration prior to synchronizing. Without any tubes connected, adjust the knob until the centre LED is on.

During calibration resolution can be adjusted from 2cmHg (centimetres of mercury) down to 0,5cmHg to allow the user to fine tune. Most vehicle O.E.s specify a resolution of 0,5cmHg for accurate synchronizing and CarbMate is the only low cost alternative able to meet the standard.

Standard features

A single green LED at the dead-centre "happy face" mark indicates that the compared manifold vacuums are equal to within the selected resolution.
Simple, but clear user instructions are printed on the CarbMate, and these are supplemented by an additional information leaflet.

Power is provided from the vehicle battery or an external 12V battery via a 6 ½ ft (2m) power cable with large crocodile clips.
The standard kit includes the instrument and a 12VDC powercord.
A specially designed nylon carry case for storing the CarbMate kit is available as an option.
A optional rubber holster provides protection against mechanical shocks and knocks.

Further options include the unique "flexi-rigid" manifold adapters as used on the VacuumMate, which allow easier connection to difficult to reach manifold points.

Smart control : YES
Sync results : YES

Ideal for : “Smart” synchronizing of throttle valves on 2 cylinder carburettor or injection engines.

4 cylinder synchronizing : This is possible with use of the optional 4 channel adapter kit (# TS-220)

Adjustable: 0,5 – 2cmHg

During calibration resolution can be adjusted from 2cmHg (centimetres of mercury) down to 0,5cmHg to allow the user to fine tune. Most vehicle O.E.s specify a resolution of 0,5cmHg for accurate synchronizing and CarbMate is the only low cost alternative able to meet the standard.
A ZERO adjustment knob provides easy & quick pre-calibration prior to synchronizing. Without any tubes connected, adjust the knob until the centre LED is on.

Effective design

Special design allows electrical contact in all types of wire harness connectors without damaging the cable shroud or connector body.

Standard features

The Probulator back-probe set includes 1 pair of larger & 1 pair of smaller radius scoop-points for easy entry into nearly all automotive electrical connectors
Enter connector housings without damage to connector or cable
Establish sure electrical contacts within connectors without "hit & miss"
Accepts 4mm Ø banana plugs of standard voltmeter & multimeter LT leads
Coated brass scoop-points resist corrosion & enhance structural rigidity
2 pairs per set, offered at a popular price for every electrical meter user
Attractively packaged to sell itself at retail points of sale