100% AUTOMATIC, SAFE AND SIMPLE TO USE
(may be possible
even from >3V)
Basic parameters
- Main constant current charge Amperes, 12 V batteries (0,9A)
- Minimum battery size recommended (3Ah)
- Maximum battery size recommended, charging mode (39Ah)
- Maximum battery size recommended, maintaining mode (90Ah)
- Number of LEDs for battery condition status indication (2)
- Number of stages in the voltage- & current- regulated automatic constant current & constant voltage charging program (3)
- Delivered with detachable battery snap-connection sets, one with battery clamps, the other with ring terminals (YES)
Safety
- Circuit protected against inverse polarity connection (YES)
- Inverse polarity connection indication (Charging circuit will not start)
- Circuit protected against short-circuiting battery clamps (YES)
- “No-spark” protection on short-circuiting battery clamps (YES)
- OK for long term connection & support of battery Diagnostic & Maintenance Features (YES)
- Identification of batteries with internally short-circuited cell (Green LED fails to indicate)
- Effective interactive float charge for long term battery maintenance (YES)
- If during the maintenance mode the battery starts to lose charge, whether due to an internal problem or due to an additional outside load being imposed on it, the maintenance “float-charge” reverts to the absorption stage to provide the additional current necessary to counter the discharge until the cause of the problem is removed. (YES & the Yellow LED indicates instead of the Green LED)
2 year limited warranty.


