Accessories Fuel
| TS-200 | M5 Flexi-rigid adapter |  |
| TS-201 | M6 Flexi-rigid adapter | |
| Includes fibre washer. The unique flexi-rigid adapter allows fitment to difficult to reach threaded carburetor & fuel injection manifold sync’ points. Bend the outer sheath to the appropriate angle / shape & then turn the inner tube with brass threaded end into the threaded hole. | ||
| TS-202 | T – Piece connector |  |
| TS-203 | Brass M5 threaded adapter |  |
| TS-204 | Brass M6 threaded adapter | |
| Includes fibre washer & neoprene sealing cap.
Ideal for 2 stroke carburetor engines (i.e. snowmobiles etc.) that are not fitted with manifold connection points. |
||
| TS-205 | Extended M5 threaded adapter |  |
| TS-206 | Extended M6 threaded adapter | |
| Includes 1 ½ ft / 0,5m fuel & oil resistant hose & sealing cap Ideal for mounting on sports bikes / vehicles where access to carburetor or fuel injection synchronizing input requires disassembly of various side panels, air-filter & the fuel tank. | ||
| TS-220 | 2 to 4 cylinder synchronizing adapter kit for SynchroMate & CarbMate |  |
| Converts a SynchroMate or CarbMate from a 2 channel to a 4 channel synchronizer. Click here for Fitment & operational instructions … |
||
| TS-221 | 4 to 6 cylinder synchronizing adapter kit for VacuumMate |  |
| Converts a VacuumMate from a 4 channel to a 6 channel synchronizer. Use on Honda Goldwing / Valkyrie / Rune. Click here for Fitment & operational instructions … |
||
| TS-222 | Black nylon carry case |  |
| Delivered as standard equipment with all VacuumMate & IgnitionMate models (as well as SynchroMate in certain countries). The carry case has pockets for instructions, power lead and zipped comparments for adapters, cables & probes. |
||
| TS-223 | Black ‘rubber’ protective holster |  |
| TS-224 | Red ‘rubber’ protective holster | |
| Fits SynchroMate & CarbMate | ||
| TS-225 | High quality ‘santoprene’ fuel & oil resistant hose – Length 3ft / 1m Fits on VacuumMate, SynchroMate, CarbMate |
 |
| TS-233 | Replacement battery cord set for TecMate diagnostic tools. |  |
Accessories ROTAX
| TS-400 | CarbMate & SynchroMate ROTAX adaptor 2 x 6ft / 2m hoses and metal fi ttings for use on ROTAX aircraft engines. |
 |
| TS-401 | High quality ‘santoprene’ fuel & oil resistant hose – Length 6ft / 2m Fits on VacuumMate, SynchroMate, CarbMate |
 |
| TS-222 | Black nylon carry case | |
| Delivered as standard equipment with all VacuumMate & IgnitionMate models (as well as SynchroMate in certain countries). The carry case has pockets for instructions, power lead and zipped comparments for adapters, cables & probes. |
||
| TS-223 | Black ‘rubber’ protective holster | |
| TS-224 | Red ‘rubber’ protective holster | |
| Fits SynchroMate & CarbMate | ||
| TS-225 | High quality ‘santoprene’ fuel & oil resistant hose – Length 3ft / 1m Fits on VacuumMate, SynchroMate, CarbMate |
|